Hydrafacial treatments have become a buzzword in the skincare industry. While professional treatments are common, this equipment is now so easy to use at home. This guide takes you through the step-by-step process of using a Hydrafacial machine at home to ensure you make the most out of it.
Hydrafacial Machine: An Introduction
The Hydrafacial machine is a multi-functional hydrodermabrasion machine that cleanses, exfoliates, extracts, hydrates, and provides antioxidant protection. It employs hydrodermabrasion technology to slough away dead skin cells, clear your pores, and suffuse your skin with nourishing serums. The machine usually comes with:
- Handpieces: For cleaning, exfoliation, extraction, and humidity.
- Bottles: For serums and solutions (e.g., blackhead removal, hydration, and nutrients).
- Adjustable Settings: Suction, spray intensity, and vibration levels
One of the best-selling products is its 6-in-1 hydro facial dermabrasion machine for its versatility to be used for multiple skin problems.
Preparations Prior to the Treatment
So, how to use hydra facial machine? This is the skincare prep that needs to be done before using your Hydrafacial machine:
- Remove Makeup and Dirt:
This will help wash away dirt, oils, and makeup with a gentle makeup remover.
Start by cleansing your face with a gentle cleanser to keep your skin clean. - Apply Toner:
Toners to balance the skin’s pH and prepare the skin for treatment. - Patch Test:
Do a patch test to make sure your skin does not react badly to the serums or solutions. - Steam Your Face:
Cc your eye area and add steam hot steam — a solid 10 minutes. This aids in plumping open pores, which can make it easier to extract blackheads and whiteheads.
Step-by-Step Guide to Using the Hydrafacial Machine
How to use a hydrafacial machine? Here are few steps on how to use Hydrafacial machine at home effectively.
1. Clean Pores and Skin
Machine Settings: Once everything is close to you, adjust the machine to the recommended settings (5-8 min).
Pick a Serum: Pour the mixed liquid nutrients into one of the three bottles (A, B, or C).
Add Pure Water into Bottle D: Use pure water for the treatment.
Suction: Turn knob right (clockwise) to increase suction, left (counterclockwise) to decrease. Begin at 50% of the maximum suction, and go from there based on your comfort.
2. Blackheads and Whiteheads Extractions
Spiral the handpiece across three areas (forehead, cheeks, and chin), then connect them.
You can use the same technique all over your face to pull out blackheads, whiteheads, and acne.
3. Oxidation Sprayer
Adjust Settings: Set the sprayer up for 5-8 minutes.
Cover Eyes and Nose: Hold the sprayer against your eye at a 10-15 cm distance.
Hydrate Skin: The sprayer delivers tiny doses of oxygen into the basal layer of your skin, giving it moisture and nutrients.
4. Scrubber
Set Parameters: level 5 in 5 Minutes in the constant working mode.
Dirt-Removing Pores: Dip the scrubber into its jaws, cheeks, and forehead like an acupoint to transform blackheads, whiteheads, and acne into small particles and remove them.
5. Cold Hammer
Set Parameters: 5-8 min under level 3-7 in cold mode.
Apply Gel: Move the handpiece over the jaw, cheeks, and forehead to tighten pores, smooth skin, and erase wrinkles.
6. Ultrasound
Set Parameters: Stay in level 3-7, maximum 10-15 minutes active phase.
Apply Essence: Using the handpiece, move in a circular motion from your jaw to your cheeks and forehead to stimulate cell regrowth and nutrient absorption.
7. Bio Firm
Settings: Use level 3-7 by activating 10-15 minutes in mode 1
Apply Gel: Move the handpiece circularly to tighten skin and promote intercellular permeability.
By now, I’m sure you already know how to use the Hydrafacial machine.
Post-Treatment Care
Here are the steps to follow after your Hydrafacial treatment for enhanced results:
Apply a Face Mask:
After 15 minutes, remove the mask.
Cleanse Your Face:
Use a gentle facial cleanser to wash off any residue.
Apply Skincare Products:
Lock in moisture and protect your skin with toner, essence, lotion, face cream, and sun cream.
Safety Precautions
Avoid Sensitive Areas: Avoid using the machine on sensitive or broken skin.
Monitor Suction and Heat: Experiment with what feels comfortable for your skin, but don't leave it on too long or go in too high of a setting to avoid swelling or burns.
Patch Testing: Any new serums or solutions should be patch tested first.
If you have serious skin complaints, visit a dermatologist before using the machine.
Conclusion
Hydrafacial machine at home – Is it perfect and effective? With this complete scrub routine, your skin cleanses, scrubs, and hydrates, and follows you all smooth and shiny. Make sure to read the directions thoroughly and be safe to achieve the best results.
FAQs
Do you use a Hydrafacial machine every day?
No, the machine should be done once a week to really help the skin without over-exfoliating. While Hydrafacials aren’t brutal or harsh, they do require suction and exfoliation, and done too often, they can irritate the skin and upend the natural barrier. Use it too much and it will dry you out, redden you up or break you out. Finally, allowing your skin to breathe between treatments gives it an opportunity to enjoy the full effects of the treatment and renew itself naturally.
How long does a Hydrafacial take?
There’s a 30-to-45-minute completion time for a full treatment. That can vary a bit based on your skin concerns and if you add extras like LED therapy or an oxygen spray. Though a complete, multi-step facial, there is no downtime, making it easy to incorporate into a busy schedule.
Can I use my serums with the machine?
You should use the serums supplied with your machine or the ones recommended by the manufacturer. And randomly applied skincare can clog the tubing or lessen the machine’s efficacy. Use only formulas specifically designed for infusion systems for safety and optimal results.
Can all skin types benefit from a Hydrafacial machine?
Yes, Hydrafacials are appropriate for all skin types. Do note that if you have sensitive skin, it’s better to begin at lower settings and do a patch test. This will minimize irritation and also make sure that your skin can tolerate the treatment.
